Valve Cover Gaskets Set - Lycoming R-680 Series; Set of 18

Valve Cover Gaskets Set – Silicone for Lycoming R-680 Series; Set of 18    –   Our silicone rubber gaskets are made from aerospace mechanical        grade AMS  silicone and designed to withstand temperatures up        to 400 degrees Fahrenheit.     –    Therefore, they will not break down and deform or crack up like         cork or neoprene.     –    Our gaskets seal uneven and warped surfaces and          eliminate corrosion.  –    Gaskets are 100% reusable. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~   Fits:         Lycoming  R-680 Series.                          FAA-PMA Approved.   Part #:       RG-1843-18 OEM#:          1843 Package of 18 gaskets Silicone gasket – 1/16″ thick. Reusable.   These gaskets are available to purchase individually- see part RG-1843     INSTALLATION INSTRUCTIONS:      FOLLOW INSTRUCTIONS ON THE LABEL.       Wash  all surfaces with solvent.       Remove all traces of oil.    The gasket must be installed DRY  (No oil or lube of any type).    TORQUE TO 8 to 12 INCH POUNDS.    CAUTION – DO NOT OVER-TIGHTEN! Over tightening causes the gasket to bulge out or squeeze out. If that happens, then back off on the torque.   TO REUSE GASKETS:     Wash gaskets briefly in hot soapy water.        Rinse well and dry all surfaces.     Re-install gaskets using the above installation instructions.   Proudly made in the USA. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~